ACC3 Open
- SKU:
- ACC3Open
Description
The AiM ACC2 allows you to ACC2 manage up to 4 analog inputs to a max frequency of 200 Hz each.
- Thermcocouples
- Thermoresistance
- 0-5 V
- 0-12V
You can manage a wide range of sensors, from TC to to 12v output. You can also mix them with the 5 optional harness configurations. Please note that thermocouples require the dedicated compensated cables. Once the proper harness is chosen, you can configure the sensors in RS3. P
You need a USB programming cable or the USB Programming Cable w/12v inputs
Related Products
Related Products
ACC3 AiM
$325.00
The AiM ACC3 allows you to manage up to 4 analog inputs to a max frequency of 200 Hz each.
Thermcocouples
Thermoresistance
0-5 V
0-12v
Speed Inputs
You can manage a wide range of sensors, from TC...
LCU1S Open
$419.00
The LCU One S is a state of the art Lambda controller with fully configurable CANbus output. With the easy to use AiM Race Studio 3 configuration, adding lambda sensors to your CAN logger or ECU has...
GPS09c Open
$349.00
The first item in the new Open AiM Architecture, the GPS09 C Open allows connection to not only AiM devices, but it allows the full 25 Hz data stream to be output on a user configurable CAN message...
Open RS232 Harness
$42.00
This cable features a 7 pin Binder connector to a RS232 flying leads so you can connect your GPS09 C Prop Open or Open to a logger system.
K8 Keypad Open
$276.00
The K8 is a compact keypad based on CAN bus protocols. It comes equipped with eight buttons that have interchangeable inserts. The K8 is water and dust resistant and can be installed inside and...