PDM Accessories

The K8 is a compact keypad based on CAN bus protocols. It comes equipped with eight buttons that have interchangeable inserts. The K8 is water and dust resistant and can be installed inside and outside the cockpit. The red, green, amber, blue, magenta,...

The AiM K6 Keypad adds the easily integration of a keypad to the MXx series of dashes as well as the PDM. Control page functions, add data inputs to be recorded, and control power outputs. Configured and used as a CAN expansion, there is no coding...

DC Innovate carbon cover

PKP-3500-SI is a compact keypad based on CAN protocol. It comes equipped with fifteen keys with interchangeable 15mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the...

The TrailBrake Terminated Plug and Play PDM32 offers a new option for installing your PDM32. With a fully sealed, concentrically twisted harness, DT connectors, and all the standard AiM sensor and expansion connections, this will simplify your install...

This PDM LVDS cable connects the display to the PDM module. It's 4m length is twice the standard 2m cable and gives you more options in PDM and display position.

This custom, TrailBrake original download harness allows you to leave the download cable plugged into your PDM32 or PDM08 all the time and still have an IP65 waterproof system. Utilizing the same USB mini bulkhead fitting as the dash products, there is a...

We are the only AiM supplier to offer a Plug and Play harness to connect to your PDM32, saving you hours of time building the harness yourself. The genuine AMP connectors are all terminated, booted, and heat shrunk with Raychem DR-25. The entire trunk...

This custom made Plug and Play harness for the RIO unit allows you to avoid having to terminate the AMP connector and move right on to connecting your switches, inputs, and digital outputs. Save yourself time and frustration in your project with this...

PKP-2600-SI is a compact keypads based on CAN protocol. They come equipped with keys with interchangeable 15 mm inserts. The keypads are water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with...

The RIO02 Remote Input/Output Module is dedicated to push button management when the available inputs are not enough. It features 19 inputs, primarily dedicated to push button management. Easily configure momentary, two-position, and multi-status, with...

We are the only AiM supplier to offer a Plug and Play harness to connect to your PDM32, saving you hours of time building the harness yourself. The genuine AMP connectors are all terminated, booted, and heat shrunk with Raychem DR-25. The entire trunk...