AiM Open

The K8 is a compact keypad based on CAN bus protocols. It comes equipped with eight buttons that have interchangeable inserts. The K8 is water and dust resistant and can be installed inside and outside the cockpit. The red, green, amber, blue, magenta,...

With the low hysteresis, high accuracy, and high operating temps that stand above the competition, the AiM pressure sensors are offered with flying leads for use with any data system. The flying leads from the sensor are easily integrated into DT, DTM,...

Thanks to the Inductive Contactless Technology, ECLIPSE series assures unmatched wear resistance; no contact means minimum wear and tear therefore no performance degradation during his life cycle.  The continuous research of the best solutions for...

This Binder 712 8 pin male connector is perfect for making your own ACC2 sensor harness or Solo 2 DL ECU connection cable. 

The AiM K6 Open Keypad allows a fully user defined CAN output including bus speed, address, message, and more. Easily integrated with any system that allows a CAN input, you can manage the button states all inside the K6. From momentary, toggle, and...

The AiM flying lead CAN open cables are 7 pin male Binder 712 connectors for connection to the GPS09c Open, K8 Open, ACC2 Open, or LCU One S open. The provide 24 gauge flying leads with +12v, ground, CAN+, and CAN- connections. They can be shortened by...

The AiM Open CAN programming harness with a 12v feed can be used on any AiM open device, but is particularly suited to the K8 Keypad and the ACC2 Open. The 12v supply allows you to feed 12v to the keypad of ACC2 for the lights  or 12v sensor feeds...

Another first by TrailBrake, we have made the STL files for our bar mount adapters. A simple design that is low profile, it cradles the ACC while while attaching with 6mm long M3 screws. Simple zip tie securing, this tidies up your install and holds the...

The Open USB harness is for programming AiM Open devices including the GPS09 C Open, Pro Open, and CAN Expansion.