CAN Expansion

These 7 pin male 712 Binder to 5 pin male 712 Binder cables are for connecting AiM Open systems to AiM devices including data hubs and harnesses. They work with the GPS09c Open, K8 Keypad Open, ACC2 Open, and LCU One S open.

The TrailBrake SLM mount was designed to give uses an easy to install and versatile mounting solution for the AiM Shift Light Module. The included hardware makes mounting to nearly any dash easy, while the hinged feature allow you to AiM the SLM for best...

These lightweight but strong, carbon fiber reinforced PETG mounts create an easy way to mount your ACC to your rollbar. Whether round tube or a classic 1" square, these mounts include the M3 hardware, contoured surface, and easy zip tie securing. No more...

Another first by TrailBrake, we have made the STL files for our bar mount adapters. A simple design that is low profile, it cradles the ACC while while attaching with 6mm long M3 screws. Simple zip tie securing, this tidies up your install and holds the...

This cable features a 7 pin Binder connector to a RS232 flying leads so you can connect your GPS09 C Prop Open or Open to a logger system.

This custom made Plug and Play harness for the RIO unit allows you to avoid having to terminate the AMP connector and move right on to connecting your switches, inputs, and digital outputs. Save yourself time and frustration in your project with this...

These paddles fit the AiM Formula Wheel 3 to add electronic paddle shifting to the wheel. You can see the wheel here. 

Two port Data Hub, 712 5-pin/m to two port hub/spade/m

The shift light module is the best way to move the shift lights (or predictive on the MXS 1.2, MXG 1.2, and MXP) device to be better in the drivers line of sight.    The Module is CAN compatible with the following AiM systems: EVO4S, EVO5,...

Its management is really very simple: just connect the Module to your logger and the data will be saved simultaneously both in the logger and on the SD Card. No configuration is needed. The SD card can be removed and replaced even during pitstops, while...

This is the replacement cable for the GPS08 and GPS09 roof mount antennas. It is 5 pin on the 719 (plastic) end and 5 pin on the 712 (metal) end.