CAN Expansion

Data hubs work like a power strip for the AiM CAN network, allowing you to connect multiple items to your dash/logger. This is the device you need to connect a SCHD, GPS, LCU One, Channel Expansion, and more to your logger. Turns 1 input into 4 and can...

The K8 is a compact keypad based on CAN bus protocols. It comes equipped with eight buttons that have interchangeable inserts. The K8 is water and dust resistant and can be installed inside and outside the cockpit. The red, green, amber, blue, magenta,...

This Binder 712 8 pin male connector is perfect for making your own ACC2 sensor harness or Solo 2 DL ECU connection cable. 

The AiM K6 Keypad adds the easily integration of a keypad to the MXx series of dashes as well as the PDM. Control page functions, add data inputs to be recorded, and control power outputs. Configured and used as a CAN expansion, there is no coding...

This oxygen sensor is a direct replacement for the one included in your kit. It is recommended to replace them when there is a misreading, use with leaded fuels, or damage. 

These inserts fit into K8 Keypads and offer nearly all the button options you may need. 

The AiM Open CAN programming harness with a 12v feed can be used on any AiM open device, but is particularly suited to the K8 Keypad and the ACC2 Open. The 12v supply allows you to feed 12v to the keypad of ACC2 for the lights  or 12v sensor feeds...