CAN Expansion

The AiM ACC3 allows you to manage up to 4 analog inputs to a max frequency of 200 Hz each. Thermcocouples Thermoresistance 0-5 V 0-12v Speed Inputs You can manage a wide range of sensors, from TC to to 12v output. You can also mix them with the 5...

The AiM ACC2 allows you to ACC2 manage up to 4 analog inputs to a max frequency of 200 Hz each. Thermcocouples Thermoresistance 0-5 V 0-12V You can manage a wide range of sensors, from TC to to 12v output. You can also mix them with the 5 optional...

The AiM ACC2 allows you to ACC2 manage up to 4 analog inputs to a max frequency of 200 Hz each. Thermcocouples Thermoresistance 0-5 V 0-12V You can manage a wide range of sensors, from TC to to 12v output. You can also mix them with the 5...

The K8 is a compact keypad based on CAN bus protocols. It comes equipped with eight buttons that have interchangeable inserts. The K8 is water and dust resistant and can be installed inside and outside the cockpit. The red, green, amber, blue, magenta,...

The LCU One S is a state of the art Lambda controller with fully configurable CANbus output. With the easy to use AiM Race Studio 3 configuration, adding lambda sensors to your CAN logger or ECU has never been easier.

The LCU One S is a state of the art Lambda controller with fully configurable CANbus output. With the easy to use AiM Race Studio 3 configuration, adding lambda sensors to your CAN logger or ECU has never been easier.

The first item in the new Open AiM Architecture, the GPS09 C Open allows connection to not only AiM devices, but it allows the full 25 Hz data stream to be output on a user configurable CAN message or RS232. Now you can bring this advanced stream to...

The K8 is a compact keypad based on CAN bus protocols. It comes equipped with eight buttons that have interchangeable inserts. The K8 is water and dust resistant and can be installed inside and outside the cockpit. The red, green, amber, blue, magenta,...

The AiM K6 Keypad adds the easily integration of a keypad to the MXx series of dashes as well as the PDM. Control page functions, add data inputs to be recorded, and control power outputs. Configured and used as a CAN expansion, there is no coding...

This custom made Plug and Play harness for the RIO unit allows you to avoid having to terminate the AMP connector and move right on to connecting your switches, inputs, and digital outputs. Save yourself time and frustration in your project with this...

These paddles fit the AiM Formula Wheel 3 to add electronic paddle shifting to the wheel. You can see the wheel here. 

The culmination of over a decade of GPS programming and use, the GPS09 uses both the GPS satellites and the GLONASS satellites for better accuracy and speed. Updated from the GPS08, it now logs data at 25 Hz for almost 3x the accuracy! Works with any AiM...