Patch Cables

This is the cable you want to move your CAN expansion further away from the wiring already in your car. Use it to extend the connection between any two expansion devices or from the dash harness. Easily move a data hub, channel expansion, LCU One, or...

This cable is perfect for connecting your Shift Light Module to a data hub or a SCHD Rev 1 to a data hub. It's 5 pin male 712 to a 5 pin male 712 ends are different than the normal male-female cables.

This Binder 712 8 pin male connector is perfect for making your own ACC2 sensor harness or Solo 2 DL ECU connection cable. 

These 7 pin male 712 Binder to 5 pin male 712 Binder cables are for connecting AiM Open systems to AiM devices including data hubs and harnesses. They work with the GPS09c Open, K8 Keypad Open, ACC2 Open, and LCU One S open.

This 12 volt CAN power harness, 1.5m 712 5 pin male to spade terminals provides diode protection to connect extra power to a data hub for systems with multiple SCHD GP or other extra power needs. 

Evo4S TC cable to connect data logger direct to a thermocouple. 

These 5 pin Binder 712 male connectors are used for connection to data hubs and the AiM proprietary CAN network.

The Binder 712 5 Pin female connector is for the connection of AiM devices to the AiM CAN network.

These Y cables are used to split the speed channels on Evo 4 and Evo4s loggers. It is a (1) 712 male 4 pin connector to (2) 719 female 4 pin connectors. 

These Binder 4 pin male 712 connectors work with the Evo4, Evo4s, Channel Expansions, and female 712 4 pin connectors.