Description
The AiM MX UTV Polaris is a GPS dash logger built for the off-road world. This kit plugs straight into the diagnostic connector on your Polaris RZR, so you get ECU data on the dash and in your logs without splicing a single wire.
Pick your vehicle from the dash menu and the MX UTV reads the factory ECU channels, adds a belt temperature reading from the included sensor, and calculates lap and split times from its built-in GPS and GLONASS receiver at 10 Hz. If your track is in the AiM database it finds the start/finish line on its own. Everything is stored in 4 GB of internal memory and downloads to your PC over WiFi for analysis in Race Studio.
ECU channels for Polaris:
- Polaris RZR: Speed, RPM, Gear, ECT, TPS, brake switch and fuel rate
- Polaris RZR Turbo: all of the above plus boost pressure and charge air temp
Ideal for: Polaris UTV racers, desert and short course teams, and anyone who wants to watch belt temp, engine data and lap times on one screen.
Key features:
- Plug and play 7-pin Binder 712 harness to the Polaris diagnostic connector
- Belt temperature sensor with 712-719 extension cable included (2.5 m or 4 m, your choice)
- 1 analog input for belt temp, oil temp or oil pressure, depending on your setup
- Integrated GPS for lap times, speed, position and lateral acceleration
- 5 configurable RGB shift lights and 2 RGB alarm LEDs
- 268 x 128 pixel display with 7 backlight colors and ambient light sensor
- 4 GB internal memory, WiFi download
- IP65, glass fiber reinforced nylon body, 137 x 88.4 x 31.9 mm, 330 g
- Expandable over CAN with an AiM Lambda Controller or SmartyCam 3
Need a second belt sensor? Take a look at our CVT IR Belt Temp sensor and UTV Analog Belt Temp Sensor.
Running a different brand? We also carry the MX UTV for Can-Am, Arctic Cat and Yamaha. More info can be found here, and the user guide is here.
Compatibility. This MX UTV kit is wired for the Polaris RZR. The dash also supports the Can-Am, Arctic Cat and Yamaha models with that brand's harness.